Kramer Electronics Switch FC-1ETHN Manuel d'utilisateur télécharger pdf (Page 23)

Technical Specifications

KRAMER ELECTRONICS, LTD.

FC1ETHN.hex

Figure 13: Atmel – Flip Window (Operation Completed)

8. Close the “Atmel – Flip” window.

9. Disconnect the power on the FC-1ETHN.

10. Disconnect the RS-232 port on the FC-1ETHN from the Null-modem

adapter.

11. Set DIP 1 REPROG to OFF.

12. Reconnect the power on the FC-1ETHN.

9 Technical Specifications

Table 6 includes the technical specifications:

Table 6: Technical Specifications

of the FC-1ETHN Ethernet Controller

ETHERNET INTERFACE: 10/100 BaseT Ethernet

SERIAL INTERFACES: RS-232, DB9M, signals: RX, TX, RTS, CTS, Ground

RS-485

NETWORK PROTOCOLS: ICMP (ping), ARP, TCP, UDP

POWER SOURCE: 12 VDC, <80mA

DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98"), W, D, H

WEIGHT: 0.3 kg. (0.66 lbs.) approx.

ACCESSORIES: Power supply, mounting bracket

1 Specifications are subject to change without notice

1 2 ... 18 19 20 21 22 23 24 25 26

Pas de commentaire

Kramer Electronics Switch FC-1ETHN Manuel d'utilisateur Page 23