Kramer-electronics SID-DP Manuel d'utilisateur télécharger pdf

The Kramer SID-DP DisplayPort Step-In Commander

Congratulations on purchasing your Kramer DigiTOOLS

SID-DP DisplayPort Step-In

Commander which is ideal for boardrooms and presentation rooms.

The Kramer SID-DP is an HDCP compliant DisplayPort and unbalanced stereo audio

remote device that is used to remotely take control of a compatible switcher, for

example, the Kramer VP-81SID. The commander does not need a power adapter if

located within 50m (164ft) of the switcher.

Figure 1 and Table 1 define the SID-DP DisplayPort Step-In Commander.

Figure 1: SID-DP DisplayPort Step-In Commander Front and Rear Panel

Table 1: SID-DP DisplayPort Step-In Commander Front and Rear Panel Features

Feature

Function

AUDIO INPUT 3.5mm Mini Jack

Connect to the unbalanced stereo audio source

DP INPUT DisplayPort Connector

Connect to the DP video source

STEP IN Button

Press to switch the input to this remote control commander. The

button lights when active

ON LED

Lights green when the unit receives power

LINE OUT Twisted Pair RJ-45

Connector

Connect to the TP input of a compatible switcher (for example, the

VP-81SID) using CAT 6 or higher specification cable

Remote Switch Terminal Block

Connections (pins 2 and 3)

Connect to the remote step-in switch

12V DC Power Connector

Connect to the power adapter

Remote LED Terminal Block

Connections (pins 1 and 2)

Connect to the remote LED (observe correct polarity, pin 1 to the

LED anode and pin 3 to the cathode)

Figure 2 illustrates how to connect the SID-DP to a source, switcher, and remote switch

and LED.

Figure 2: SID-DP Wiring Connections

To connect the SID-DP as illustrated in Figure 2:

1. Connect the DP video source (for example, a laptop graphics source) to the

DisplayPort connector on the front panel of the SID-DP.

2. Connect the unbalanced stereo audio source (for example, a laptop graphics source)

to the 3.5mm mini jack AUDIO INPUT connector on the front of the SID-DP.

3. Using STP cable, connect the LINE OUT RJ-45 TP connector on the rear panel of

the SID-DP to the required input on the rear panel of the VP-81SID (up to 50m

away).

4. Optional—Connect the terminal block on the rear of the SID-DP to the remote

switch and LED.

Note: The LED supply includes a current limiting resistor and is designed to work

with any standard LED.

5. Connect the power adapter to the 12V DC connector on the rear of the SID-DP and

to the mains electricity (if the distance exceeds 50m (164ft) from the switcher).

1 2

SID-DP 2
Installation Instructions 2

Résumé du contenu

Page 1

The Kramer SID-DP DisplayPort Step-In Commander Congratulations on purchasing your Kramer DigiTOOLS® SID-DP DisplayPort Step-In Commander which is id

Page 2 - Installation Instructions

Technical Specifications Technical specifications of the SID-DP are shown in Table 2. Table 2: Technical specifications1of the SID-DP DisplayPort St

Commentaires sur ces manuels

Pas de commentaire

Kramer-electronics SID-DP Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour les appareils électriques Kramer-electronics SID-DP. Kramer Electronics SID-DP User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour les appareils électriques Kramer-electronics SID-DP