Kramer Electronics SID-DVI Spécifications télécharger pdf

The Kramer SID-DVI DVI Step-In Commander

Congratulations on purchasing your Kramer DigiTOOLS

SID-DVI DVI Step-In

Commander which is ideal for boardrooms and presentation rooms.

The Kramer SID-DVI is a DVI and unbalanced stereo audio remote control commander

that is used to remotely take control of a compatible switcher, for example, the

VP-81SID. The commander is HDCP compliant and does not need a power adapter if

located within 50m (164ft) of the switcher.

Figure 1 and Table 1 define the SID-DVI DVI Step-In Commander.

Figure 1: SID-DVI DVI Step-In Commander Front and Rear Panel

Table 1: SID-DVI DVI Step-In Commander Front and Rear Panel Features

Feature

Function

AUDIO INPUT 3.5mm Mini Jack

Connect to the unbalanced stereo audio source

DVI INPUT DVI Connector

Connect to the DVI video source

STEP IN Button

Press to switch the input to this remote control commander. The

button lights when active

ON LED

Lights green when the unit receives power

LINE OUT Twisted Pair RJ-45

Connector

Connect to the TP input of a compatible switcher (for example,

the VP-81SID) using CAT 6 or higher specification cable

Remote Switch Terminal Block

Connections (pins 2 and 3)

Connect to the remote step-in switch

12V DC Power Connector

Connect to the power adapter

Remote LED Terminal Block

Connections (pins 1 and 3)

Connect to the remote LED (observe correct polarity, pin 1 to the

LED anode and pin 3 to the cathode) )

Figure 2 shows the wiring connections of the SID-DVI.

Figure 2: SID-DVI Wiring Connections

To connect the SID-DVI as illustrated in Figure 2:

1. Connect the DVI video source (for example, a computer graphics source) to the

DVI connector on the front panel of the SID-DVI.

2. Connect the unbalanced stereo audio source (for example, a computer graphics

source) to the 3.5mm mini jack AUDIO INPUT connector on the front of the

SID-DVI.

3. Using STP cable, connect the LINE OUT RJ-45 connector on the rear panel of the

SID-DVI to one of the inputs on the rear panel of the VP-81SID (up to 50m away).

4. Optional—Connect the terminal block on the rear of the SID-DVI to the remote

switch and LED.

Note: The LED supply includes a current limiting resistor and is designed to work

with any standard LED.

5. Connect the power adapter to the 12V DC connector on the rear of the SID-DVI

and to the mains electricity (if the distance exceeds 50m (164ft) from the switcher).

1 2

Résumé du contenu

Page 1

The Kramer SID-DVI DVI Step-In Commander Congratulations on purchasing your Kramer DigiTOOLS® SID-DVI DVI Step-In Commander which is ideal for board

Page 2 - Installation Instructions

Technical specifications Technical specifications of the SID-DVI are shown in Table 2. Table 2: Technical specifications1 of the SID-DVI DVI Step-In

Commentaires sur ces manuels

Pas de commentaire

Kramer Electronics SID-DVI Spécifications

Naviguer en ligne ou télécharger Spécifications pour Extenseurs AV Kramer Electronics SID-DVI. Kramer Electronics SID-DVI Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Extenseurs AV Kramer Electronics SID-DVI