Kramer Electronics VP-437XL Manuel d'utilisateur télécharger pdf (Page 17)

Installing and Configuring the Com Port Redirector Software

3 Installing and Configuring the Com Port Redirector

Software

The Com Port Redirector allows any PC running Windows to use ports on a

Kramer device as if they were connected directly to the PC. The Redirector

creates a virtual COM port within Windows, which for most purposes acts

just like the selected serial port on the Kramer device.

CPR supports Windows XP, Windows 2000 and 2003 server, and Windows

Vista, including Terminal Services.

Com Port Redirector consists of the following modules:

• CPR Manager enables you to map com ports to device servers,

configure and test comports

• CPR Monitor enables you to identify and troubleshoot problems

You will find detailed instructions for using the modules in the Com Port

Redirector online Help.

Overall Procedure

The following procedure summarizes the steps for using Com Port

Redirector.

1. Install Com Port Redirector on each PC that will communicate with the

device server.

2. Review the general usage guidelines for the device server.

3. Configure the device server and Com Port Redirector.

4. Verify the connectivity between Com Port Redirector and the device

server.

3.1 Installing the Com Port Redirector Software

To install Com Port Redirector:

1. Perform the appropriate step to start the installation:

 If Com Port Redirector is on a CD-ROM, insert the CD-ROM into

the computer’s CDROM drive and click the Redirector button,

—or—

 If you downloaded Com Port Redirector, double-click the

downloaded file.

The Lantronix CPR Welcome window is displayed.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Pas de commentaire

Kramer Electronics VP-437XL Manuel d'utilisateur Page 17