Kramer-electronics 621T Manuel d'utilisateur télécharger pdf (Page 13)

621T, 621R - Connecting and Operating the 621T, 621R

5.2 Operating the 621T/621R DVI Optical

Transmitter/Receiver

To properly operate the 621T/621R system:

 Make sure you have a media receiver or a graphic controller card with a DVI

connector on your PC/Mac or SUN system.

 Make sure that your graphic card supports the maximum resolution of the

display you are about to connect

 Avoid “hot plugging” the 621T or 621R. This is not a recommended practice

with live digital voltages

5.3 Wiring the TP LINE IN / LINE OUT RJ-45 Connectors

This section defines the TP pinout, using a straight pin-to-pin cable with RJ-45

connectors.

Note, that the cable ground shielding must be connected / soldered to

the connector shield.

EIA /TIA 568B

Figure 5: TP PINOUT

Wire Color

Orange / White

Orange

Green / White

Blue

Blue / White

Green

Brown / White

Brown

1 2 ... 8 9 10 11 12 13 14 15 16 17

Pas de commentaire

Kramer-electronics 621T Manuel d'utilisateur Page 13