Kramer Electronics VS-801USB Manuel d'utilisateur télécharger pdf (Page 10)

VS-801USB - Connecting the VS-801USB 7

Figure 2: Connecting to the VS-801USB

4.1 Connecting to the VS-801USB via RS-232

You can connect to the VS-801USB via an RS-232 connection using, for example,

a PC. Note that a null-modem adapter/connection is not required.

To connect to the VS-801USB via RS-232, connect the RS-232 9-pin D-sub front

panel port on the VS-801USB unit via a 9-wire straight cable (only pin 2 to pin 2,

pin 3 to pin 3, and pin 5 to pin 5 need to be connected) to the RS-232 9-pin D-sub

port on your PC.

4.2 Connecting to the VS-801USB via the ETHERNET

You can connect to the VS-801USB via Ethernet using either of the following

methods:

• Direct connection to the PC using a crossover cable (see Section

4.2.1)

• Connection via a network hub, switch, or router, using a straight-through

cable (see Section

4.2.2)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Pas de commentaire

Kramer Electronics VS-801USB Manuel d'utilisateur Page 10