Kramer-electronics FC-24ETH Manuel d'utilisateur télécharger pdf (Page 24)

Connecting the FC-21ETH, FC-22ETH and FC-24ETH

6. Select Use the following IP Address for static IP addressing and fill in the

details as shown in Figure 13.

For TCP/IPv4 you can use any IP address in the range 192.168.1.1 to

192.168.1.255 (excluding 192.168.1.39) that is provided by your IT

department.

Figure 13: Internet Protocol Properties Window

7. Click OK.

8. Click Close.

6.1.2 Connecting the Ethernet Port via a Network Hub or Switch

You can connect the Ethernet port of the FC-24ETH to the Ethernet port on a

network hub or using a straight-through cable with RJ-45 connectors.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 46 47

Pas de commentaire

Kramer-electronics FC-24ETH Manuel d'utilisateur Page 24