Kramer-electronics RB-8 Manuel d'utilisateur télécharger pdf (Page 8)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Connecting the RB-8/RB-8E

6 Connecting the RB-8/RB-8E

To connect the RB-8/RB-8E, as illustrated in Figure 4, do the following:

1. Connect the power cable from each external device to any free power output

port on the RB-8/RB-8E.

2. Connect a switched cable to the CONTROL/GROUND contact of the same

port (for example, from the PL-8 Low Voltage Relay Controller as shown in

Figure 2.)

3. Connect the power cord to the RB-8/RB-8E (not illustrated in Figure 2.)

Figure 4: Connecting the RB-8

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Kramer-electronics RB-8 Manuel d'utilisateur Page 8