Kramer-electronics EDID Designer Manuel d'utilisateur télécharger pdf (Page 29)

EDID Designer - Editing an EDID

5.4 Using CEA Extensions

CEA extensions are used for specifying additional parameters or information on

other interfaces.

5.4.1 Adding a CEA Extension in the Advanced Mode

To add a CEA extension:

1. Click the ADD button at the bottom left of the desktop panel.

2. Select CEA Ext.

An Extension Info tab opens and 128 bytes are added to the byte map.

To specify the CEA extension block type:

1. After opening a CEA extension, click the ADD button.

2. Select CEA Ext Block.

The Ext Block drop down box opens:

3. Click the type of extension block you want to add.

A descriptor tab is added for each extension and the appropriate number of

bytes are reserved for configuration.

Note: Though it is theoretically possible to configure 256 CEA extension blocks,

only one is allowed in the EDID Designer.

1 2 ... 24 25 26 27 28 29 30 31 32 33

Pas de commentaire

Kramer-electronics EDID Designer Manuel d'utilisateur Page 29