Kramer-electronics PL-8 Manuel d'utilisateur télécharger pdf (Page 10)

Firmware Upgrade

6 Firmware Upgrade

The PL-8 firmware is located in FLASH memory, which lets you upgrade to

the latest Kramer firmware version in minutes! The process involves:

• Downloading from the Internet (see section 6.1)

• Connecting the PC to the RS-232 port (see section 6.2)

• Upgrading Firmware (see section 6.3)

6.1 Downloading from the Internet

You can download the up-to-date file

1. Go to our Web site at

from the Internet. To do so:

www.kramerelectronics.com and download the

file: “FLIP_PL8.zip” from the Technical Support section.

2. Extract the file: “FLIP_PL8.zip” to a folder (for example, C:\Program

Files\Kramer Flash).

3. Create a shortcut on your desktop to the file: “FLIP.EXE”.

6.2 Connecting the PC to the RS-232 Port

Before installing the latest Kramer firmware version on a PL-8 unit, do the

following:

1. Connect the RS-232 rear panel terminal block connector according to

section 5.2.

2. Disconnect the power.

3. Slide the underside switch to PROGRAM.

4. Connect the power.

6.3 Upgrading Firmware

Follow these steps to upgrade the firmware:

1. Double click the desktop icon: “Shortcut to FLIP.EXE”.

The Splash screen appears as follows:

1 The files indicated in this section are given as an example only. File names are liable to change from time to time

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 22 23

Pas de commentaire

Kramer-electronics PL-8 Manuel d'utilisateur Page 10