Kramer-electronics PT-4iREX Manuel d'utilisateur télécharger pdf (Page 2)

The External Remote IR Receiver

The External Remote IR receiver is used to remotely control the machine and includes

a 0.9 meter (3 feet) External Remote IR Receiver cable (model C-A35M/IRR-03).

The distance between the remote controller and the machine can be extended by

using a 15 meter external IR receiver (model C-A35M/IRR-50), or by using the

optional Kramer Stereo cables, 15 meters (50 feet) each (model C-A35M/A35F-50).

3.5mm Connector

IR Receiver

External Remote

IR Receiver Cable

The External Remote IR Receiver connects to the EXT. 3.5mm jack on the side

panel of the machine. Once connected, the Kramer machine can be controlled from a

distance.

Installing the External Remote IR Receiver

To connect the External Remote IR Receiver, do the following:

1. Disconnect the power.

2. Connect the 3.5mm plug of the External Remote IR Receiver cable to the EXT.

3.5mm jack.

3. Connect the power.

Note, that once the external remote IR receiver is connected, the IR IN

built-in receiver is disabled.

1 2

Pas de commentaire

Kramer-electronics PT-4iREX Manuel d'utilisateur Page 2