Kramer-electronics RC-8000 Manuel d'utilisateur télécharger pdf (Page 23)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Connecting Your Matrix Switchers

6.2 Connecting a Standalone Unit

To connect a standalone unit:

 Connect the power supply

 Connect the audio and/or video input and output cables

 Connect the video reference input for VS-88V and/or SD-7588V

 Set dipswitch # 1 OFF and dipswitches # 2, 3, 4, 5 and 6 ON (see section 6.1)

The IN SYSTEM button is non responsive

6.3 Connecting Several Units with/without the Remote Controller

To connect several units with or without the remote controller:

 Connect the power supply

 Connect the audio and/or video input and output cables

 Connect the video reference input for VS-88V or SD-7588V

 In a system with more than one video switcher (either VS-88V or SD-7588V),

connect all video switchers to the video reference by looping between the sync

BNC connectors

 Set the dipswitches for the different MACHINE # (1 to 8) for each machine

and set dipswitch # 5 OFF and dipswitch # 6 ON

 Connect all the 4 terminals to the RS-485 interface connectors

 Operate the front panel controls of any switcher

Figure 7 illustrates a typical system connection:

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 36 37

Pas de commentaire

Kramer-electronics RC-8000 Manuel d'utilisateur Page 23