Kramer Electronics VS-30FW Manuel d'utilisateur télécharger pdf (Page 10)

VS-30FW - Using the VS 30FW FireWire 800/1394b Repeater / HUB

5 Using the VS 30FW FireWire 800/1394b

Repeater / HUB

To use the VS-30FW FireWire 800/1394b Repeater / HUB, as the example in

Figure 2 illustrates, do the following:

1. Connect up to 3 FireWire devices to up to 3 ports, for example: PORT 1 to a

video camcorder, PORT 2 to a hard drive, and PORT 3 to a computer.

Not all ports need to be connected. Any unused port should simply be left unconnected

2. Connect the 12V DC power adapter to the power socket and connect the

adapter to the mains electricity (not shown in

Figure 2).

The ON red LED lights.

3. Be sure that the power on each device is turned ON.

The ACTIVE green LED lights indicating that there is data present on a port.

Figure 2: Connecting the VS-30FW FireWire 800/1394b Repeater / HUB

1 2 ... 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Kramer Electronics VS-30FW Manuel d'utilisateur Page 10