Kramer Electronics Speaker spk-cs12 Manuel d'utilisateur télécharger pdf (Page 13)

ESD Ceiling Speaker - Installing the ESD Ceiling Speaker 11

3. If required, daisy-chain the next speaker (see Section 4.3

Note: Do not over-tighten the screws. It may cause damage to both the speakers

and the surface.

4.6 Installing the Half-Tile Size Speaker

When installing the half-tile size model:

1. Remove the ceiling tile.

2. Cut the ceiling tile in half (to 30x60cm).

3. Place the ceiling mounting bracket (supplied with the half-tile unit only)

between the ceiling rails, as illustrated in

Figure 9.

Figure 9: Placing the Ceiling Mounting Bracket

4. Drop the half-tile size speaker in the appropriate opening, so it is supported

by the ceiling rails and the ceiling mounting bracket (see

Figure 10).

No screws are needed.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Kramer Electronics Speaker spk-cs12 Manuel d'utilisateur Page 13