
VP-443 - Controlling the VP-443
Select the audio delay time: OFF, 40ms, 110ms and 150ms
Select the sound options: ON, MUTE
Select the action that will be followed by mute:
INDEPENDENT: the audio muting is independent of the FREEZE and
BLANK functions
FREEZE
BLANK
FREEZE/BLANK: when freezing or blanking the video, the audio will
be muted (the MUTE function follows the FREEZE and the BLANK
functions)
Select:
AUTOMATIC: the embedded audio on the HDMI input is selected for
an HDMI signal, or the analog audio input is selected if the input is not
HDMI (for example, for a DVI input signal)
EMBEDDED: the embedded audio in the HDMI signal is selected
ANALOG: the analog audio input is selected
HDMI AUDIO IN is enabled only when one of the HDMI inputs is selected
6.2.4 The OSD Menu
Set the horizontal position of the OSD (from 0 to 100)
Set the vertical position of the OSD (from 0 to 100)
Set the timeout period in seconds (from 5 to 100)
Set the OSD background between 0 (solid black) and 8 (transparent)
Select the information shown on the screen during operation:
ON: the information is shown permanently
OFF: the information is not shown
INFO: the information is shown for a few seconds
6.3 Connecting to the VP-443 via RS-232
You can connect to the VP-443 via an RS-232 connection using, for example, a PC.
Note that a null-modem adapter/connection is not required.
To connect to the VP-443 via RS-232 Connect the RS-232 9-pin D-sub rear panel
port on the product unit via a 9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3,
and pin 5 to pin 5 need to be connected) to the RS-232 9-pin D-sub port on your PC
6.4 Connecting the VP-443 via the ETHERNET Port
To connect and configure the Ethernet port of the VP-443, refer to the ETHERNET
Configuration (Lantronix) GUIDE on our Web site:
http://www.kramerelectronics.com/support/product_downloads.asp
Commentaires sur ces manuels