Kramer-electronics VP-460 Manuel d'utilisateur télécharger pdf (Page 42)

VP-460 - Controlling the VP-460 37

7 Controlling the VP-460

The VP-460 can be controlled via:

• The front panel buttons (see

Section 7.1

• The OSD menu (see

)

Section 7.2

• The infrared remote control transmitter (see

)

Section 7.3

7.1 Controlling via the Front Panel Buttons

)

The VP-460

includes the following front panel buttons:

• Input selector buttons for selecting the required input: PC, CV and SDI (see

Section 7.1.1

• PIP and FREEZE buttons (note, these buttons illuminate when selected)

)

• MENU (left arrow), ENTER (right arrow), and up, down, arrow buttons

• Output Volume up and down buttons (when not in the OSD mode)

• RESET TO 720p and PANEL LOCK buttons

7.1.1 Using the INPUT Front Panel buttons

When selected, an INPUT front panel button behaves as follows:

Selecting the: Causes the button to:

Main input button Illuminate continuously

PiP input button Blink (the light On period is shorter than the light Off period)

Same Main input button and

PiP button

Blink (the light On period is longer than the light Off period)

If you want to adjust the image of a selected input in a window, press

that input button again (up to 3 times) for fast tuning. Pressing that

input button for the fourth time initiates full tuning of the window.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 60 61

Pas de commentaire

Kramer-electronics VP-460 Manuel d'utilisateur Page 42