Kramer-electronics VP-690 Manuel d'utilisateur télécharger pdf (Page 8)

VP-690 - Overview

3 Overview

The Kramer VP-690 is a high quality presentation switcher and scaler. It accepts

one of nine inputs: one SD/HD/3G HD-SDI signal, two HDMI signals, two computer

graphics signals on 15-pin HD connectors, two composite video signals on RCA

connectors and two component video (also known as Y, Pb, Pr, Y, Cb, Cr and YUV;

compatible with both SD and HD component ) signals on RCA connectors. It scales

the video, embeds the audio, and outputs the signal to the HDMI output as well as

to a computer graphics output and an RGBHV video output together with a digital

audio output and an analog stereo audio output.

The VP-690 is HDTV compatible and the resolution can be up- or down-scaled as

follows: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, WXGA, WSXGA, WUXGA,

NATIVE, VGA, SVGA, XGA, SXGA UXGA, 1280x800, WXGA+, 1600x900,

2048x1080@50 and 2048x1080@60

The VP-690 Presentation Switcher/Scaler:

 Has a video bandwidth of up to 2.97Gbps

 Is SMPTE 259M, 292M and 424M compliant

 Is HDCP Compliant - The HDCP (High Definition Content Protection) license

agreement allows copy-protected data on the HDMI input to pass only to the

HDMI output

 Has analog audio inputs which include volume control, and digital (S/PDIF)

and analog stereo audio outputs

 Automatically detects and selects the audio source for the HDMI input. Default

selection is HDMI – if this is not present, then the machine uses the audio

from the analog input

 Comes with an On-Screen Display (OSD) for easy setup and adjustment,

accessible via the IR remote control and via the front-panel buttons

 Has a non-volatile memory that retains the last settings used

 Supports firmware upgrade via RS-232

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 28 29

Pas de commentaire

Kramer-electronics VP-690 Manuel d'utilisateur Page 8