Kramer-electronics VP-725NA Manuel d'utilisateur télécharger pdf (Page 21)

16 VP-725NA - Connecting the VP-725NA Presentation Switcher/Scaler

 Connect the UXGA connector to the UXGA acceptor, for example, a

monitor (not illustrated in

Figure 3)

7. Connect the MASTER OUT terminal block connector to the balanced audio

input on the audio amplifier, and route the audio input (corresponding to the

converted video input) to the MASTER OUT.

8. Connect the power cord (not illustrated in

Figure 3).

We recommend that you use only the power cord that is supplied with this machine.

9. If required connect:

 A PC (see Section

5.3).

 The Ethernet port (see Section

5.4).

Figure 3: Connecting to the VP-725NA Presentation Switcher/Scaler

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 72 73

Pas de commentaire

Kramer-electronics VP-725NA Manuel d'utilisateur Page 21