Kramer-electronics VP-727A-BA Manuel d'utilisateur télécharger pdf (Page 19)

Flash Memory Upgrade

7 Flash Memory Upgrade

The VP-727A-BA firmware is located in FLASH memory, which lets you

upgrade

• Downloading from the Internet (see section

to the latest Kramer firmware version in minutes! The process

involves:

7.1)

• Connecting the PC to the RS-232 port (see section 7.2)

• Upgrading Firmware (see section 7.3)

7.1 Downloading from the Internet

You can download the up-to-date file

1. Go to our Web site at

from the Internet. To do so:

www.kramerelectronics.com and download the

file: “FLIP_VP727A-BA.zip” from the Technical Support section.

2. Extract the file: “FLIP_VP727A-BA.zip” to a folder (for example,

C:\Program Files\Kramer Flash).

3. Create a shortcut on your desktop to the file: “FLIP.EXE”.

7.2 Connecting the PC to the RS-232 Port

Before installing the latest Kramer firmware version on a VP-727A-BA unit,

do the following:

1. Connect the RS-232 9-pin D-sub rear panel port according to section 6.2.

2. On the rear side, slide the SETUP DIP 1 PROGRAM switch to ON.

3. Switch the unit ON.

Note: this sequence is critical – first push the FLASH PROG button and then turn

on the unit

1 Upgrade should be carried out by skilled technical personnel. Failure to upgrade correctly will result in the malfunction of

the machine

2 The files indicated in this section are given as an example only. File names are liable to change from time to time

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Pas de commentaire

Kramer-electronics VP-727A-BA Manuel d'utilisateur Page 19