Kramer-electronics VP-731 Manuel d'utilisateur télécharger pdf (Page 13)

Control Software - Defining the Control Software 11

3.6 Input Properties

The following table describes the Input Properties frame.

Note: The fields displayed are dependent on the type of switcher

connected and the type of input chosen.

Switch Field 1 Field 2 Parameters

Input 1-4 Source Type -

Component

H-position Sets the horizontal position of the

display:

0-1000

V-position Sets the vertical position of the

display: 0-1000

Phase Sets the input phase: 0-31

Source Type -

Y/C

Video standard Sets the video standard: Auto,

NTSC, PAL

Source Type -

Video

Video standard Sets the video standard: Auto,

NTSC, PAL

Input 5-6

UXGA1 H-position Sets the horizontal position of the

display:

0-1000

V-position Sets the vertical position of the

display: 0-1000

Frequency Sets the frequency for UXGA inputs:

0-50

Phase Sets the input phase: 0-31

Input 7-8 HDMI1 Color format Sets the color format: Auto, RGB,

YUV

HDMI switch

behavior

Set to DVD/Normal or PC/Bypass

Set to Normal for sources with

HDCP. When in Normal operation,

the unit sends a hot plug to the

source for any Group/Scaler

switching request. There might be

some graphic cards that might shut

OFF the VGA/HDMI output following

the hot plug detection. To prevent

this, set this parameter to the Bypass

mode so the unit will not send a hot

plug for switching request (the hot

plug will be detected by the source

only when plugging a physical

connection)

HDMI Input HDCP Set to On or Off for each HDMI input

HDCP support can be enabled (On) or

disabled (Off) for each of the HDMI

inputs, allowing the source to transmit a

non-HDCP signal if required (for

example, when working with a Mac

computer)

Input 9 USB Slide show Sets the speed of the slide show:

Long, Max, Off

1 2 ... 8 9 10 11 12 13 14 15 16 17

Commentaires sur ces manuels

Pas de commentaire

Kramer-electronics VP-731 Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Kramer-electronics VP-731