Kramer-electronics VP-747 Manuel d'utilisateur télécharger pdf (Page 26)

VP-747 - Understanding the VP-747 21

7 Understanding the VP-747

This section describes the:

• UNIVERSAL inputs, see

• PREVIEW/PROGRAM outputs, see

Section 7.1

• Switching/Scaling of an input, see

Section 7.2

• PIP feature, see

Section 7.3

• Panel Lock, see

Section 7.4

7.1 Understanding the UNIVERSAL Inputs

Section 7.5

The VP-747 has eight sets of inputs (Each set consists of five BNC connectors:

R/Pr, G/Y/CV, B/Pb/C, Hs/Cs, and Vs); each set can be programmed to operate

as composite video, s-Video, component video, RGB/YUV, RGBS, RGsB, or

RGBHV. INPUT 1 and INPUT 2 can also accept DVI/HDMI inputs.

The VP-747 is a universal presentation matrix switcher/scaler: you choose what

type of source to connect to each input. You can connect different video types or

the same or similar video types. See the examples in

Figure 3 and Figure 4.

7.2 Understanding the PREVIEW/PROGRAM Outputs

The VP-747 has two outputs: a PREVIEW output, and a PROGRAM output. Each

of these outputs functions independently and has DVI/HDMI connectors and VGA

connectors, as well as sets of five BNC connectors used to output one of the

following: RGB, RGBHV, or component video): R/P

R, G/Y, B/PB, HS, and VS.

The HDMI signal is usually HDCP protected. We recommended

using an HDCP compliant display, otherwise the HDMI output does

not appear on the screen

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 64 65

Pas de commentaire

Kramer-electronics VP-747 Manuel d'utilisateur Page 26