Kramer-electronics VM-2C Manuel d'utilisateur télécharger pdf (Page 8)

VM-2C - Connecting the VM-2C

4 Connecting the VM-2C

Always switch off the power to each device before connecting it to your

VM-2C. After connecting your VM-2C, connect its power and then

switch on the power to each device.

To connect the VM-2C as illustrated in the example in Figure 2:

1. Connect a component video source (for example, a DVD player) to the Y,

PB/CB, and PR/CR INPUT RCA connectors.

2. Connect the OUTPUT RCA connectors (Y, PB/CB, and PR/CR) to up to two

component video acceptors (for example, a display and a projector).

3. Connect the 12V DC power supply to the 12V DC socket and then connect

the power supply to the mains electricity (not shown in Figure 2).

Figure 2: Connecting the VM-2C 1:2 Component Video DA

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Kramer-electronics VM-2C Manuel d'utilisateur Page 8