Kramer-electronics VS-3232DN Manuel d'utilisateur télécharger pdf (Page 51)

VS-3232DN - Installing and Using the Test Module to Troubleshoot Video Problems 47

10.4.1 Testing the Projector Output

Signal path: c to d; d to projector

To test the projector output:

1. Configure Input 33 to Output 33 (see

Section 7.4

2. Connect Output 33 to the projector.

3. Set the generated video resolution (see

Section 10.2

4. Set the pattern for the generated video (see

Section 10.3

5. Verify that the projector output is as expected.

10.4.2 Testing the Output Signal Path to the Projector

Signal path: a to b; b to projector

To test the output signal path to the projector:

1. Configure Input 33 to Output 1 (see

Section 7.4

2. Connect Output 1 to the projector.

3. Set the generated video resolution (see

Section 10.2

4. Set the pattern for the generated video (see

Section 10.3

5. Verify that the projector output is as expected.

10.4.3 Testing the Input and Output Signal Path to the Projector

Signal path: c to e; e to f; f to b; b to projector

To test the input and output signal path to the projector:

1. Configure Input 33 to Output 33 (see

Section 7.4

2. Connect Output 33 to Input 1.

3. Configure Input 1 to Output 1.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 79 80

Pas de commentaire

Kramer-electronics VS-3232DN Manuel d'utilisateur Page 51