Kramer Electronics VM-1H4C Manuel d'utilisateur télécharger pdf (Page 11)

VM-1H4C – Connecting the VM-1H4C

3. Connect the front panel remote IR 3.5mm mini jack to the IR device, (for

example, an IR emitter).

Note: All data is passed simultaneously to all four TP outputs.

4. Optional—Connect to a serial controller, (for example, a computer) to the

RS-232 9-pin D-sub connector.

5.1 Connecting a Controller to the RS-232 Port

To connect a controller to the device via the RS-232 serial port:

 If the controlled device requires a crossed connection, use a straight cable

from the computer to the transmitter and use a straight cable from the

receiver to the device

 If the controlled device requires a straight connection, use a straight cable

from the computer to the transmitter and use a crossed cable from the

receiver to the device

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17

Pas de commentaire

Kramer Electronics VM-1H4C Manuel d'utilisateur Page 11