Kramer Electronics 840HXL Manuel d'utilisateur télécharger pdf (Page 18)

840Hxl - Operating the 840Hxl Pattern Generator 15

6.2.2 Connecting to the Device

To connect to the device:

1. Run the Control Application by clicking Start > Programs > Kramer

Electronics > 840Hxl.

2. Click the Connect button.

The Connection Method window is displayed as shown in

Figure 7.

Figure 7: Connection Method Window

3. Select the required connection method (via a serial or USB connection) by

clicking the relevant option button.

4. For a serial connection, select the required Com port from the drop-down

list.

5. For a USB connection, select the required USB device from the drop-down

list.

To view an up-to-date list of available USB ports, press the Refresh Ports

button.

Note: If the drop-down list shows No USB Devices, then either the cable is

faulty/not connected, you have not installed the USB driver (see

Section 6.2.1

6. Click Connect.

If the connection is not successful, a Timeout error message appears as

shown in

) or

the installation was not successful.

Figure 8. If the connection is successful, the main window shown

Figure 9 appears.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 30 31

Pas de commentaire

Kramer Electronics 840HXL Manuel d'utilisateur Page 18