Kramer Electronics VP-437XL Manuel d'utilisateur télécharger pdf (Page 10)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Installing and Running the DeviceInstaller™ Configuration Software

Figure 11: Ping Device Status

4. Click Close to close the dialog box and return to the main window.

Note: If you do not receive “Reply” messages, make sure the unit is properly

attached to the network and that the IP address assigned is valid for the particular

network segment you are working with. If you are not sure, check with your

Systems Administrator

2.4 Configuring the Ethernet Port Using DeviceInstaller™

You must configure the Ethernet Port so that it can communicate on a

network with your serial device. For example, you must set the way the unit

will respond to serial and network traffic, how it will handle serial packets,

and when to start or close a connection. You can configure your unit locally

or remotely using the following procedures:

• Use the DeviceInstaller™ to configure the unit. Some features are only

available through the DeviceInstaller™ Installer menus

• Use a standard Web browser to access the unit’s internal Web pages

and configure the unit over the network (see

Section 2.5 ). This is the

easiest and preferred method

• Make sure that the Java™ 2 Runtime Environment (Standard Edition,

Version 1.4.1 or higher) software is installed on your PC. If not,

download it from

http://java.sun.com

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 24 25

Pas de commentaire

Kramer Electronics VP-437XL Manuel d'utilisateur Page 10