Kramer Electronics Switch FC-1ETHN Manuel d'utilisateur télécharger pdf (Page 22)

Flash Memory Upgrade

5. Click OK and press the keyboard shortcut key F3 (or select the

“Communication / RS232” command from the Settings menu, or press the

keys: Alt SCR).

The “RS232” window appears. Change the COM port:

Figure 11: RS-232 Window

6. Click Connect.

In the “Atmel – Flip” window, in the Operations Flow column, the Run

button is active, and the name of the chip appears as the name of the third

column: AT89C51RD2.

Verify that in the Buffer Information column, the “HEX File: FC1ETHN.hex”

appears.

FC1ETHN.hex

Figure 12: Atmel – Flip Window (Connected)

7. Click Run.

After each stage in the operation is completed, the check-box for that stage

becomes colored green

When the operation is completed, all 4 check-boxes will be colored green and

the status bar message: Memory Verify Pass appears

1 See also the blue progress indicator on the status bar

2 If an error message: “Not Finished” shows, click Run again

1 2 ... 17 18 19 20 21 22 23 24 25 26

Pas de commentaire

Kramer Electronics Switch FC-1ETHN Manuel d'utilisateur Page 22