Kramer Electronics FC-5 Manuel d'utilisateur télécharger pdf (Page 18)

FC-5 - Using the FC-5 15

6.2 Transmitting Commands via the Contact Closure

You can use the FC-5 to transmit commands via the contact closure (see also

Section

6.4):

Figure 14: Transmitting Commands via the Contact closure

The INPUTS contact closure remote control pins let you temporarily route an input

to the output by momentarily attaching an input to the GND (Ground) pin (do not

connect more than one PIN to the Ground PIN at the same time). In this example

INPUT 3 is routed to the output, by temporarily attaching PIN 3 to PIN GND, and a

Kramer switcher is connected to the COM2 port

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25

Pas de commentaire

Kramer Electronics FC-5 Manuel d'utilisateur Page 18